i.
Install the clutch stop on the machine with 2 carriage
bolts, 2 fl at washers, and 2 locknuts (Fig. 505).
Note: Make sure there is a twist in the clutch stop.
Fig 505
j.
Connect the harness connector to the electric PTO
clutch (Fig. 506).
Fig 506
Z580/Z593/Z595 Diesel Service Manual
k. Install a tie strap around the wire on the electric PTO
clutch (Fig. 507).
PICT-3974
13. Install the traction pump drive belt. Refer to "Traction
Pump Drive Belt Installation" on page 4-37.
14. Tighten the hose clamp securing the air cleaner
hose to the engine (Fig. 508).
PICT-3979a
ENGINE
Fig 507
PICT-3988a
Fig 508
PICT-3612
5
5-27