Table of Contents
Advertisement
6. Install new tapered bearing cups by pressing each
bearing cup into the caster fork hub so that the thick-
er part of the taper is pressed in fi rst. The bearing
cups should seat against the shoulder inside the
frame.
Section view of caster fork hub (Fig. 009):
A
B
C
A
Fig 009
A. Tapered Bearing Cup (2)
B. Caster fork hub (sectioned)
C. Machined shoulder inside caster fork hub (2)
Z580/Z593/Z595 Diesel Service Manual
7. Pack the upper and lower tapered bearings with
8. Install the lower bearing into the caster fork hub (Fig.
tapered bearing cup install
grease (No. 2 general purpose lithium base or
molybdenum grease) (Fig. 010).
Fig 010
011).
Fig 011
CHASSIS
IMG_7719a
IMG_7722
3-3
3
Advertisement
Table of Contents
