Toro Diesel Z Master Service Manual page 174

51. Position the 2 harness R-clamps to the inside of the
front panel on the bottom radiator plate assembly.
Install a bolt and nut securing each R-clamp (Fig.
544).
Fig 544
52. Plug the harness into the fan connector (Fig. 545).
Fig 545
Z580/Z593/Z595 Diesel Service Manual
53. Route the overfl ow hose up, through the front right
hand corner of the radiator frame assembly, to the
coolant fi ll overfl ow barb (Fig. 546).
PICT-3549
54. Slide the overfl ow hose onto the barb on the radiator
cap fl ange (Fig. 547).
PICT-3547
ENGINE
Fig 546 PICT-3544a
Fig 547 PICT-3690
5
5-37