Toro Diesel Z Master Service Manual page 77

CHASSIS
4. Position the left hand control rod assembly into the
traction frame (Fig. 203).
3
5. Install a bolt, washer and nut securing the left hand
control rod ball joint to the hydrostatic pump control
arm (Fig. 204).
Note: The washer is installed between the ball joint
and the control arm.
3-54
Fig 203 PICT-3133
Fig 204 PICT-3131
6. Install the neutral return yoke onto the neutral return
bolt (Fig. 205).
Fig 205
7. Position the left hand neutral return yoke to the left
hand motion control tab and install a clevis pin and
cotter pin (Fig. 206).
Fig 206
Z580/Z593/Z595 Diesel Service Manual
PICT-3126
PICT-3124