Table of Contents
Advertisement
67. Position the front end of the right hand top frame
brace to the inside of the right hand radiator brace.
Loosely install 2 bolts, washers and nuts to secure
(Fig. 560).
Fig 560
68. Align the right hand top frame brace, cooler shield,
rear support and fan guard. Loosely install a bolt,
washer and nut to secure (Fig. 561).
Fig 561
Z580/Z593/Z595 Diesel Service Manual
69. Tighten all the fasteners securing the right and left
guard straps and frame braces to the frame and rear
support.
70. Install the Hood Assembly. Refer to "Hood Assembly
Installation" on page 3-22.
71. Check and fi ll the engine oil per specifi cations.
72. Connect the negative battery cable to the battery.
73. Fill the fuel tanks with fuel per specifi cations.
74. Fill the radiator with 50/50 mix of extended life anti-
freeze/Dex-Cool and water.
Note: Cooling system capacity:
87 oz. (2.6 liters) Z593 and Z580
148 oz. (4.4 liters) Z595
75. Install the radiator cap (Fig. 562).
PICT-3726
PICT-3727
ENGINE
Fig 562
PICT-3771a
5
5-41
Advertisement
Table of Contents
