Toro Diesel Z Master Service Manual page 266

13. Route the PTO drive belt onto the clutch pulley.
Install the idler arm spring (Fig. 844).
Fig 844
14. Twist the clutch stop and install the end to the frame
bracket with 2 carriage bolts, 2 fl at washers, and 2
locknuts (Fig. 845).
Note: Make sure there is a twist in the clutch stop.
Fig 845
Z580/Z593/Z595 Diesel Service Manual
15. Plug the clutch harness into the electric PTO clutch
plug (Fig. 846).
PICT-3969
16. Secure the electric PTO clutch plug and wires to the
frame crossbar with a cable tie (Fig. 847).
PICT-3973
MOWER DECKS
Fig 846
Fig 847
PICT-3979
7
PICT-3988a
7-43