Table of Contents
Advertisement
16. Install the bolt, washer and nut securing the right
hand control rod assembly to the right hand motion
control assembly (Fig. 215).
Note: The washer is installed between the ball joint
and motion control assembly tab.
Fig 215
17. Install a bolt, washer and nut securing the left hand
control rod assembly to the left hand motion control
assembly (Fig. 216).
Note: The washer is installed between the ball joint
and motion control assembly tab.
Fig 216
Z580/Z593/Z595 Diesel Service Manual
18. Raise the seat and insert the right and left damper
bolts into the right and left motion control assembly
tabs. Install a nut onto each of the damper bolts to
secure the motion control dampers to the motion
control assemblies (Fig. 217).
PICT-3151
19. Connect the harness to the 2 neutral switches
located under the seat, behind the left hand and right
and sides of the traction control frame under the
traction frame assembly (Fig. 218 and 219).
Right hand neutral switch
PICT-3109
CHASSIS
Fig 217
PICT-3156
Fig 218
PICT-3075
3
3-57
Advertisement
Table of Contents
