Toro Diesel Z Master Service Manual page 119

HYDRAULIC SYSTEM
3. Connect the hydraulic hose fi ttings to the hydraulic
fl ow tester (Fig. 341).
Note: The fl ow tester shown is bidirectional so it
does not matter which order the hoses are
connected to the fl ow tester. If using a direc-
tional fl ow tester, be sure to correctly connect
hoses.
4
4. Check the hydraulic reservoir. Fill as needed with
Mobil 1, 15w-50 oil.
4-32
Fig 341 PICT-3507
5. Unplug the wire harness clutch wire from the electric
PTO clutch to prevent accidental engagement of the
mower deck (Fig. 342).
Fig 342
6. Lift the seat and unplug the harness terminals from
the seat switch. Temporarily install a jumper wire
across the harness terminals (Fig. 343).
Fig 343
Z580/Z593/Z595 Diesel Service Manual
PICT-3513
PICT-3471