ENGINE
4. Remove the 4 bolts, washers and nuts securing the
cooling fan to the shroud (Fig. 591).
5. Remove the cooling fan from the shroud (Fig. 592).
5
5-50
Fig 591
PICT-3756
Fig 592
PICT-3758
Cooling Fan Installation
1. Position the cooling fan to the back side of the
shroud. Position the fan onto the shroud as shown
(Fig. 593).
A A
Fig 593
A. Front of the machine side with large fl ange and cut-
out
B. Rear of the machine
C. Fan plug location
2. Install 4 bolts, washers and nuts securing the cooling
fan to the shroud (Fig. 594).
Fig 594
Z580/Z593/Z595 Diesel Service Manual
C C
B B
PICT-3760a
PICT-3756