Table of Contents
Advertisement
HYDRAULIC SYSTEM
16. Remove the 2 rear wheel motor mounting bolts,
spacers and nuts (Fig. 308).
4
17. Remove the wheel motor (Fig. 309).
18. For wheel motor service, refer to Parker/Ross Wheel
Motor Service Manual (form no. 492-4753).
4-20
Fig 308
PICT-3377
Fig 309
PICT-3378
Wheel Motor Installation
Note: As a reminder, prior to connecting the hy-
draulic lines, the o-rings should be replaced
with new ones and lightly lubricated with
petroleum jelly.
Note: There are two different spacers used on the
wheel motors (Fig. 310). The short spacers
are used in the front of the wheel motor (with
the brake linkage) and the long spacers are
used to retain the back of the wheel motor.
A
Fig 310
A. Short spacer
Z580/Z593/Z595 Diesel Service Manual
B
CLR DSC-2117
B. Long spacer
Advertisement
Table of Contents
