26. Position the cross shaft in the press so the opposite
bearing is facing up. Press the bearing off the shaft
(Fig. 955).
Fig 955
Open End Cap Teardown
27. Remove the oil seal from the open end cap (Fig.
956).
Fig 956
Z580/Z593/Z595 Diesel Service Manual
28. Remove the bearing race form the open end cap
(Fig. 957).
Note: The inner race and housing must be heated to
remove the race.
IMG-8520
Closed End Cap Teardown
29. Remove the bearing race from the closed end cap
(Fig. 958).
Note: The inner race and housing must be heated to
remove the race.
IMG-8536
MOWER DECKS
Fig 957
Fig 958
IMG-8537
7
IMG-8537
7-73