Toro Diesel Z Master Service Manual page 91

HYDRAULIC SYSTEM
15. Remove the hose clamp located on the hydraulic
suction hose coming from the oil fi lter (Fig. 248).
4
16. Remove the hydraulic suction hose from the fi tting
on top of the hydrostatic pump (Fig. 249).
Note: When removing hydraulic hoses from the
pump, cap the hose end and the fi tting on the
hydrostatic pump to ensure dirt and debris
does not enter the system.
4-4
Fig 248 PICT-3202
Fig 249 PICT-3203a
17. Raise the rear of the unit and remove both right and
left rear tires.
18. Mark or tag the wheel motor hydraulic hoses and
fi ttings to ensure they are reconnected correctly.
19. Remove the two hydraulic hoses from the right
wheel motor (Fig. 250).
Fig 250
20. Cap the hydraulic hoses and fi ttings (Fig. 251).
Fig 251
Z580/Z593/Z595 Diesel Service Manual
PICT-3217
PICT-3207