Toro Diesel Z Master Service Manual page 167

ENGINE
23. Apply thread locking compound to the engine block
grounding bolt (Fig. 517).
24. Position the ground wire and negative battery cable
terminal to the engine block and install the engine
5
block grounding bolt and washer (Fig. 518).
5-30
Fig 517 PICT-3669a
Fig 518 PICT-3593
25. Position the 2 harness R-clamps to the front of the
engine and install the bolts and washers to secure
(Fig. 519).
A A
Fig 519
A. Bolt, nut and washer securing the negative battery
cable and fuel lines
B. Bolt and 2 washers securing fuel lines
26. Install the following to the starter solenoid (Fig. 520):
A A
C C
Fig 520
A. Harness spade terminal
B. Battery cable
C. Starter and harness terminal
Z580/Z593/Z595 Diesel Service Manual
B B
PICT-3590
B B
PICT-3589