Traction Pump Drive Belt Installation - Toro Diesel Z Master Service Manual

11. Remove the traction pump drive belt from the pump
pulley. Lift up on the gearbox idler pulley and re-
move the belt by sliding it out around the electric
PTO clutch (Fig. 357).
Fig 357

Traction Pump Drive Belt Installation

1. Slide the traction pump drive belt over the electric
PTO clutch (Fig. 358).
Fig 358
Z580/Z593/Z595 Diesel Service Manual
HYDRAULIC SYSTEM
2. While lifting up on the gearbox idler pulley, route the
traction pump drive belt around the pump pulley and
the engine pulley as shown (Fig. 359):
PICT-3523
3. Using a spring removal tool (Toro p/n: 92-5771),
install the pump idler assembly spring (Fig. 360).
PICT-3523
Fig 359 fi g. 108-5955
Fig 360 PICT-3522
4
4-37