Table of Contents
Advertisement
12. Ensure the drain plug is installed and tight.
13. Fill the radiator with a 50/50 mix of extended life
antifreeze/Dex-Cool and water.
14. Install the radiator cap (Fig. 588).
Fig 588
15. Check the antifreeze overfl ow bottle and make sure
it is up to indicator line.
Note: Cooling system capacity:
87 oz. (2.6 liters) Z593 and Z580
148 oz. (4.4 liters) Z595
16. Connect the negative battery cable. Start the unit
up and operate for about 5 minutes. Observe all the
cooling hoses for any leaks.
17. Turn the machine off.
18. Check the coolant level in the overfl ow bottle and
add as necessary.
Z580/Z593/Z595 Diesel Service Manual
Cooling Fan Replacement
Cooling Fan Removal
1. Remove the Radiator. Refer to "Radiator Removal"
on page 5-42.
2. Unplug the cooling fan connector from the harness
connector (Fig. 589).
PICT-3771a
3. Lift the cooling fan and shroud assembly out of the
bottom radiator plate (Fig. 590).
ENGINE
Fig 589
PICT-3754
Fig 590
PICT-3755
5
5-49
Advertisement
Table of Contents
