Download
Share
Print this page
Toro DH 140 Setup Instructions
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. DH 140
  6. Setup instructions
Toro DH 140 Setup Instructions

Toro DH 140 Setup Instructions

Dh series
Hide thumbs Also See for DH 140:
1
2
3
4

Advertisement

Quick Links

Download this manual
DH 140 Lawn Tractor
Model No. 74560—Serial No. 310000001 and Up

Loose Parts

Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Key
Certificate of Conformance
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Description
Steering wheel
Roll pin
Spacer
Seat
Bolts
Adjusting knob
Flat washers
Spring washers
Grass collector
Grass collector bottom and dump frame
assembly
Hinge pin
Push nut
Snap ring
No parts required
No parts required
No parts required
No parts required
No parts required
Register at www.Toro.com.
Qty.
1
1
1
1
2
2
4
2
1
1
2
2
2
–
–
–
–
–
Qty.
1
Read before operating.
1
2
Use in the ignition and Key Choice™ switch.
1
Save for CE proof of certification.
Printed in the Czech Republic
Form No. 3416-990 Rev A
Setup Instructions
Use
Install the steering wheel.
Install the seat.
Assemble the grass collector.
Check the oil level.
Activate the battery.
Fill the fuel tank.
Check the tire pressure.
Lubricate the machine.
Use
Original Instructions (EN)
All Rights Reserved *3416-990* A

Advertisement

loading

Related Manuals for Toro DH 140

Summary of Contents for Toro DH 140

  • Page 1: Loose Parts

    Form No. 3416-990 Rev A DH 140 Lawn Tractor Model No. 74560—Serial No. 310000001 and Up Setup Instructions Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Steering wheel Roll pin Install the steering wheel.

  • Page 2: Installing The Steering Wheel

    Installing the Steering Wheel Parts needed for this procedure: Steering wheel Roll pin Spacer Procedure g012505 Position the front wheels straight ahead. Figure 1 Install the plastic spacer over the steering-wheel 1. Safety switch 3. Adjusting knobs and shaft (smaller diameter first). washers 2.

  • Page 3: Activating The Battery

    Activating the Battery No Parts Required Procedure Remove the battery from the machine; refer to the Operator’s Manual. Remove the filler caps from the top of the battery. DANGER Battery electrolyte contains sulfuric acid, which is fatal if consumed and can g012491 severely burn you.

  • Page 4: Checking The Safety System

    Install the filler caps after the battery is fully charged. Install the battery in the chassis; refer to the Operator’s Manual. Checking the Safety System No Parts Required Filling the Fuel Tank Procedure Refer to the Operator’s Manual. No Parts Required Procedure Add fuel to the fuel tank;...

This manual is also suitable for:

74560