Toro Diesel Z Master Service Manual page 227

MOWER DECKS
6. Using a spring removal tool (Toro p/n: 92-5771), re-
move the mower deck idler spring (Fig. 696).
7. Remove the mower deck belt from the gearbox deck
drive pulley (Fig. 697).
7
7-4
Fig 696 PICT-4013
Fig 697 PICT-4016
8. Place the mower deck in the transport position.
Position wood blocks under each corner of the
mower deck. Lower the mower deck onto the blocks
to remove tension from the deck lift chains (Fig.
698).
Fig 698
9. Push the deck lift handle to the lowest height-of-cut
position to overcome the tension of the lift assist
springs. Insert the hitch pin above the deck lift
handle to lock the handle in the down position (Fig.
699).
Fig 699
Z580/Z593/Z595 Diesel Service Manual
PICT-4019
PICT-4021