Strut Installation - Toro Diesel Z Master Service Manual

MOWER DECKS
13. Remove the balljoint and jam nut from the strut (Fig.
898).

Strut Installation

1. Install the balljoint and jam nut into the strut. The
length of the strut should be 17.31" (43.97cm) from
the center of the balljoint to the center of the cross
shaft of the strut (Fig. 899).
7
A. Strut
B. Jam nut
7-58
Fig 898 PICT-4121a
D
A B C
Fig 899 fi g. 108-5969
C. Balljoint
D. 17.31" (43.97cm)
2. Tighten the jam nut to secure the balljoint position
(Fig. 900).
Note: Balljoint to be positioned perpendicular to
strut.
Fig 900
3. Install 2 grease fi ttings into the strut (Fig. 901).
Fig 901
Z580/Z593/Z595 Diesel Service Manual
PICT-4119a
PICT-4116a