Parking Brake Switch
Purpose
The purpose of the parking brake switch is to ensure the
machine is in neutral and the parking brake is applied
before attempting to start the machine.
Location
The park brake switch is located on the left side, below
the left motion control handle (Fig. 658).
Fig 658
Z580/Z593/Z595 Diesel Service Manual
How It Works
In the start position it is used to ensure the park brake
is in the ON position. At the same time it allows current
to fl ow through for safety circuit. When the park brake
is released in the OFF position it bypasses both neutral
switches, as long as the operator is in the seat to main-
tain current for the safety circuit (Fig. 659).
PICT-4141
ELECTRICAL
Fig 659
CLR DSC-2528
6
6-7