4. Using a continuity tester, touch one tester lead to
one of the clutch terminals and the other lead to the
clutch housing.
5. If the tester shows a resistance reading, the fi eld has
failed and needs to be replaced.
Engine Stop Solenoid
Purpose
The engine stop solenoid stops fuel fl ow from the injector
pump when the key is turned to the Off position.
Location
The engine stop solenoid is located on the lower left side
of the engine (Fig. 682).
Fig 682
Z580/Z593/Z595 Diesel Service Manual
How It Works
The ignition switch removes power to the stop solenoid
when the key is turned to the Off position, the plunger of
the solenoid cuts off fuel fl ow to the fuel injectors and the
engine stops.
Testing
A A
A. Connector
B. Timer module
PICT-4194a
ELECTRICAL
B B
C C
Fig 683
C. Stop solenoid
PICT-4182
6
6-19