Toro Diesel Z Master Service Manual page 265

MOWER DECKS
9. Slide the clutch onto the stub shaft (Fig. 840).
10. Apply thread locking compound to the clutch bolt
threads (Fig. 841).
7
7-42
Fig 840 PICT-3956
Fig 841 PICT-3957a
11. Slide the 2 curved washers, a fl at washer and a
clutch retainer onto the clutch bolt (Fig. 842).
Note: Curved washers must be installed as shown.
Fig 842
12. Torque the clutch bolt to 50 ft-lbs. (68 Nm) (Fig.
843).
Fig 843
Z580/Z593/Z595 Diesel Service Manual
PICT-3962
PICT-3967