Toro Diesel Z Master Service Manual page 251

MOWER DECKS
7. Position the pulley onto the idler arm assembly (Fig.
788).
8. Route the mower deck belt into the pulley and place
2 washers on top of the pulley (Fig. 789).
7
7-28
Fig 788 PICT-4063
Fig 789 PICT-4086
9. Position the belt guide onto the 2 washers so that it
is 45 degrees from the idler arm (Fig. 790).
A A
Fig 790
A. 45º
10. Install a bolt to secure the belt guide to the pulley
(Fig. 791).
Fig 791
Z580/Z593/Z595 Diesel Service Manual
belt guide position
PICT-4061