Setup Buttons; Setup Button - Omron V440-F User Manual

3 Start
3-4

Setup Buttons

3-4-1 Assisted Setup
When you click the Assisted Setup button in the Start view, a dialog with a series of questions about
your application will appear. Answering these simple questions allows WebLink to configure your setup
for you.
3-4-2 Create a New Setup
Clicking Create New Setup allows you to create a new setup without using Assisted Setup. Create a
New Setup will perform a software reset and will recall default parameters except Communication
settings. The New Setup should not save to flash, so you should be able to cycle power to the reader
and see the settings that were last saved to flash.
3-4-3 Load a Setup
Select Load a Setup to load an existing .wls WebLink setup file. The .wls file contains all current
reader settings.
3-6
V440-F C-Mount Code Reader User Manual