Omron V440-F User Manual page 189

8 Advanced Settings
Daisy Chain
The Daisy Chain section, located beneath the Postamble section in the Communications Menu in
Advanced Settings, allows you to enable or disable Daisy Chain ID functionality. Daisy Chain ID
outputs the name of the reader that decoded the candidate symbol. It also allows you to determine the
type of Separator you want to appear between the reader ID and the barcode data output.
In the example below, Daisy Chain ID is Enabled and the Separator is set to:
Those two settings cause the data output to look like the example below.
The reader ID is V440-F112233.
The : character is displayed between the reader ID and the symbol data output.
See Configure Daisy Chain for more information about general Daisy Chain functionality.
EtherNet/IP and PROFINET Byte Swapping
EtherNet/IP Byte Swapping and PROFINET Byte Swapping allow you to switch the order in which
bytes are transmitted big-endian or little-endian between the reader and the PLC. If enabled, the bytes
are swapped for 2-byte words.
8-6
V440-F C-Mount Code Reader User Manual