Configuration Database Status - Omron V440-F User Manual

L-4

Configuration Database Status

L-4-1 Index
Useful for applications that require several different complex reader configurations
Usage:
to be applied sequentially. Multiple database indexes allow you to concatenate
configuration profiles, and to perform more complex operations than would
be possible with only one set of configuration parameters.
Determines the specific database index that will be used.
Definition:
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,row pointer,column
pointer,row depth,column width,symbology,morphology operator,morphology
size,tray id,matrix id>
1 to 10
Options:
L-4-2 Exposure
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,row pointer,column
pointer,row depth,column width,symbology,morphology operator,morphology
size,tray id,matrix id>
Default: 2500
50 to 100,000
Options:
Note: The Exposure parameter is read-only when the reader is in Continuous Read mode.
L-4-3 Gain
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,row pointer,column
pointer,row depth,column width,symbology,morphology operator,morphology
size,tray id,matrix id>
Default: 0
0 to 100
Options:
L-4-4 Focal Distance
Provides the focal distance adjustment for the reader.
Definition:
Any value outside this range will be rejected.
If you attempt to set the Focal distance as the out of range value of your
model, the parameter will be left as-is.
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,row pointer,column
pointer,row depth,column width,symbology,morphology operator,morphology
size,tray id,matrix id>
Default: 102
25 to 4,000 (mm)
Options:
100 to 4,000 (1/100 inch)
L-4-5 Pixel Binning
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,row pointer,column
pointer,row depth,column width,symbology,morphology operator,morphology
size,tray id,matrix id>
Default: Disabled
Options: 0 = Disabled
Important: Pixel Binning has no effect when the Image Dimension mode is configured as Region of
Interest in the Database Mode command. This is because the Window of Interest reader settings are
determined by the software based on the Region of Interest setup. There is no benefit to Pixel Binning
to increase processing speed when ROI is configured, because the frame size would need to be
increased to make Pixel Binning possible.
V440-F C-Mount Code Reader User Manual
1 = Enabled
Appendices
L
L-5