Omron V440-F User Manual page 368

Output On Output 3
Usage:
Definition:
Serial Cmd:
Default:
Options:
 Use as External Illumination Strobe
Definition:
H-13-9 Trend Analysis Output 3
Serial Cmd:
H-13-10 ISO/IEC 16022 Symbol Quality Output 3
Serial Cmd:
H-13-11 ISO/IEC 15415 Symbol Quality Output 3
Serial Cmd:
V440-F C-Mount Code Reader User Manual
This option provides discrete signalling to host software to control external devices such
as PLCs and relays. It is useful for routing, sorting, and preventing mis-packaging and
mis-routing.
Sets the discrete output functions for specific user-selected conditions.
Allows the user to determine when an output (or outputs) will be activated.
<K812,output on,output state,pulse width,output mode>
8 = Use as External Illumination Strobe
0 = Mismatch or No-Read
1 = Match (or Good Read)
2 = Mismatch
3 = No-Read
4 = Trend Analysis
5 = Symbol Quality
6 = Diagnostic Warning
7 = In Read Cycle
8 = Use as External Illumination Strobe
Asserts the external illumination strobe output during image capture.
<K782,trend analysis mode,trigger evaluation period,number to output on>
<K802,output on symbol contrast,symbol contrast threshold,output on print growth,print
growth threshold,output on axial non-uniformity,axial non-uniformity threshold,output on
UEC,UEC threshold>
<K872, output on overall grade, overall grade threshold, symbol contrast, symbol
contrast threshold, modulation, modulation threshold, reflectance margin, reflectance
margin threshold, fixed pattern damage, fixed pattern damage threshold, axial non-
uniformity, axial non-uniformity threshold, grid non-uniformity, grid non-uniformity
threshold, unused ECC, unused ECC threshold>
Appendices
H
H-33