Start - Omron V440-F User Manual

3 Start

3-1 Start
The Start view is the initial view you will see when the WebLink session begins. The connected reader
is shown, along with its user-defined name, IP address, Reader Model, Serial Number, MAC ID,
Firmware version, WebLink version, Sensor resolution, and Optics.
Note: The user-defined name must be 19 characters or fewer.
This view also allows you to choose Assisted Setup, to Create a New Setup, or to Load a Setup.
Click the gear icon at the upper right to bring up the Application Settings menu. This menu includes
several functions: Save, New, Load, Advanced, Language, Terminal, Beeper, Image Storage,
Reset Application or Factory Settings, Active Account Management, and About WebLink.
Clicking About WebLink opens the dialog shown below, which shows the current WebLink version,
Reader Model, Serial Number, Part Number, MAC ID, Sensor resolution, Firmware version, Boot
code version, Browser, Operating System, and Screen Resolution.
Clicking Contact us... takes you to https://automation.omron.com.
3-2
V440-F C-Mount Code Reader User Manual