Omron V440-F User Manual page 90

4-6-3 Data Output
Matrix data is output from top-left to bottom-right by default. If you need the data to be output in a
different order, turn on Format Output, add a symbol to the Output Formatting Editor, and then
change the type to Matrix by clicking on the type above the added symbol. Then turn on Global
Sorting Options at the bottom of the Output Formatting Editor and select the desired output order for
the decoded data.
4-6-4 Run Mode
Set Cycle to the appropriate Trigger Mode for your application and move from the Setup view to the
Run view.
Note: When multiple captures are enabled for Rapid Capture or Timed Capture, the system is able to
find all the codes in the matrix over a series of images.
V440-F C-Mount Code Reader User Manual
4 Setup
4
4-27