Matrix Mode Template Attributes - Omron V440-F User Manual

Appendices
N-10 Matrix Mode Template Attributes
Matrix Mode Template Attributes specifies the attributes of a particular matrix.
Definition:
Serial Cmd: <K766,index,x0,y0,cell width,cell height,columns,rows,horizontal offset,vertical offset,
horizontal overlap/underlap,vertical overlap/underlap>
N-10-1 Index
The Index field specifies which matrix is going to be updated by this command.
Definition:
Serial Cmd: <K766,index,x0,y0,cell width,cell height,columns,rows,horizontal offset,vertical offset,
horizontal overlap/underlap,vertical overlap/underlap>
Default: 0
0 to 1
Options:
N-10-2 x0
The x0 field specifies the location of the left-most side of the matrix template (in pixels).
Definition:
Serial Cmd: <K766,index,x0,y0,cell width,cell height,columns,rows,horizontal offset,vertical offset,
horizontal overlap/underlap,vertical overlap/underlap>
Default: 0
0 to 2592 (in pixels)
Options:
N-10-3 y0
The y0 field specifies the location of the top-most side of the matrix template (in pixels).
Definition:
Serial Cmd: <K766,index,x0,y0,cell width,cell height,columns,rows,horizontal offset,vertical offset,
horizontal overlap/underlap,vertical overlap/underlap>
Default: 0
0 to 1944 (in pixels)
Options:
N-10-4 Cell Width
The Cell Width field specifies the horizontal width of each cell (in pixels).
Definition:
Serial Cmd: <K766,index,x0,y0,cell width,cell height,columns,rows,horizontal offset,vertical offset,
horizontal overlap/underlap,vertical overlap/underlap>
Default: 350
8 to 2592 (in pixels)
Options:
N-10-5 Cell Height
The Cell Height field specifies the vertical height of each cell (in pixels).
Definition:
Serial Cmd: <K766,index,x0,y0,cell width,cell height,columns,rows,horizontal offset,vertical offset,
horizontal overlap/underlap,vertical overlap/underlap>
Default: 350
8 to 2066 (in pixels)
Options:
N-10-6 Columns
The Columns field specifies the number of columns in the matrix template.
Definition:
Serial Cmd: <K766,index,x0,y0,cell width,cell height,columns,rows,horizontal offset,vertical offset,
horizontal overlap/underlap,vertical overlap/underlap>
Default: 1
1 to 400 (Rows and columns multiplied together must not exceed the number of codes,
Options:
which is 400.)
N-14
V440-F C-Mount Code Reader User Manual