Response Timeout - Omron V440-F User Manual

Appendices
D-9 Response Timeout
Usage:
Definition:
Serial Cmd:
Default:
Options:
D-16
Only used when a response is required from the host. The reader can be
set to wait indefinitely by setting Response Timeout to zero.
The time that the reader will wait before timing out if ACK, NAK, and ETX
are enabled, and a host response is expected.
<K143,response timeout>
12 (in 1 ms increments)
0 to 255 (A zero (0) setting causes an indefinite wait.)
V440-F C-Mount Code Reader User Manual