Read Cycle Serial Commands - Omron V440-F User Manual

Appendices
F-1

Read Cycle Serial Commands

Trigger Mode/Filter Duration
Serial Trigger Character
External Trigger State
End of Read Cycle
Decodes Before Output
Multisymbol
Start Trigger Character
Stop Trigger Character
Capture Mode
Capture Time
Image Storage
Image Processing Timeout <K245,image processing timeout>
F-2
<K200,trigger mode,leading edge trigger filter,trailing edge
trigger filter>
<K201,serial trigger character>
<K202,external trigger state>
<K220,end of read cycle mode,read cycle timeout>
<K221,good decode(s) needed>
<K222,number of symbols,multisymbol separator,allow duplicates>
<K229,start character>
<K230,stop character>
<K241,capture mode,number of rapid captures,rapid capture
mode,number of continuous captures,images per read cycle
limit,read cycle history limit>
<K242,time before first capture,time between captures 1 and
2,timebetween captures 2 and 3,time between captures 3 and
4,time between captures 4 and 5,time between captures 5 and
6,time between captures 6 and 7,time between captures 7 and 8>
<K244,image storage type,image store mode>
V440-F C-Mount Code Reader User Manual