Omron V440-F User Manual page 398

I-8-5 Axial Non-Uniformity
Definition:
Serial Cmd:
Default:
Options:
I-8-6 Grid Non-Uniformity
Definition:
Serial Cmd:
Default:
Options:
I-8-7 Unused ECC
Definition:
Serial Cmd:
Default:
Options:
I-8-8 Grading Report
<VAL5>: Responds with a text report that summarized the grading of ISO/IEC29158.
This command will return the evaluation results, in a format similar to the one shown below.
V440-F C-Mount Code Reader User Manual
Axial Non-Uniformity is calculated in accordance with the ISO 29158
specification.
When enabled, the Axial Non-Uniformity is attached to the symbol out-
put data as a value.
<K727,overall,cell contrast,cell modulation,fixed pattern damage,axial
non-uniformity,grid non-uniformity,unused ECC>
Disabled
0 = Disabled
Grid Non-Uniformity is calculated in accordance with the ISO 29158
specification.
When enabled, the Grid Non-Uniformity is attached to the symbol out-
put data as a value.
<K727,overall,cell contrast,cell modulation,fixed pattern damage,axial
non-uniformity,grid non-uniformity,unused ECC>
Disabled
0 = Disabled
Unused ECC is calculated in accordance with the ISO 29158 specifica-
tion.
When enabled, the Unused ECC is attached to the symbol output data
as a value.
<K727,overall,cell contrast,cell modulation,fixed pattern damage,axial
non-uniformity,grid non-uniformity,unused ECC>
Disabled
0 = Disabled
1 = Enabled
1 = Enabled
1 = Enabled
Appendices
I
I-17