Omron V440-F User Manual page 432

L-4-11 Morphology Operator
Specifies the morphology operation (erode, dilate, open, close) used to
Definition:
pre-process the WOI.
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,row pointer,column
pointer,row depth,column width,symbology,morphology operator,morphology
size,tray id,matrix id>
Default: Disabled
L-4-12 Morphology Size
Specifies the morphology operator size to apply: Small (3 x 3), Medium (5 x 5),
Definition:
and Large (7 x 7).
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,row pointer,column
pointer,row depth,column width,symbology,morphology operator,morphology
size,tray id,matrix id>
Default: Small (3 x 3)
L-4-13 Tray ID
Tray ID is a value, such as a test tube rack ID, representing a single code
Definition:
that identifies a matrix. Typically, each test tube cap would be in a matrix in
a different slot.
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,row pointer,column
pointer,row depth,column width,symbology,morphology operator,morphology
size,tray id,matrix id>
Default: 0
0 or 20
Options:
L-4-14 Matrix ID
Matrix ID refers to each matrix setup.
Definition:
If there are multiple matrix setups with different grids, like 4 x 3, or 6 x 6,
they can be assigned multiple database indexes in a user-defined sequence.
Serial Cmd: <K255,index,exposure,gain,focal distance,pixel binning,row pointer,column
pointer,row depth,column width,symbology,morphology operator,morphology
size,tray id,matrix id>
Default: 0
0 or 1
Options:
V440-F C-Mount Code Reader User Manual
Appendices
L
L-9