Omron V440-F User Manual page 469

Appendices
N-10-10 Horizontal Overlap / Underlap
The Horizontal Overlap / Underlap field specifies the amount (in 2% percent increments
Definition:
with regard to Cell Width) to add to or subtract from Cell Width and Cell Height. The
default is 48 (–4% Horizontal Underlap).
Serial Cmd: <K766,index,x0,y0,cell width,cell height,columns,rows,horizontal offset,vertical offset,
horizontal overlap/underlap,vertical overlap/underlap>
Default: 48 = –4% Horizontal Underlap
10 = –80% Horizontal Underlap
Options:
...(continued)
48 = –4% Horizontal Underlap
49 = –2% Horizontal Underlap
50 = 0% Horizontal Overlap / Underlap
51 = +2% Horizontal Overlap
52 = +4% Horizontal Overlap
...(continued)
100 = 100% Horizontal Overlap
N-10-11 Vertical Overlap / Underlap
The Vertical Overlap / Underlap field specifies the amount (in 2% increments with
Definition:
regard to Cell Height) to add to or subtract from Cell Width and Cell Height. The
default is 48 (–4% Vertical Underlap).
Serial Cmd: <K766,index,x0,y0,cell width,cell height,columns,rows,horizontal offset,vertical offset,
horizontal overlap/underlap,vertical overlap/underlap>
Default: 48 = –4% Vertical Underlap
10 = –80% Vertical Underlap
Options:
...(continued)
48 = –4% Vertical Underlap
49 = –2% Vertical Underlap
50 = 0% Vertical Overlap / Underlap
51 = +2% Vertical Overlap
52 = +4% Vertical Overlap
...(continued)
100 = 100% Vertical Overlap
N-16
V440-F C-Mount Code Reader User Manual