Omron V440-F User Manual page 195

8 Advanced Settings
Client Mode
The following client modes will connect to a UDP Server with IP Address 192.168.188.5 listening on
port 5050.
Send/Receive Capabilities
<K166,1,1,1,3,192.168.188.5, ,5050>
Interpretation of K Command Settings: Custom Ethernet Link Enabled Default, Transport Layer =
UDP, Type = Client, Capabilities = Send/Receive Default, IP Address = 192.168.188.5, Port = 5050.
Send-Only Capabilities
<K166,1,1,1,2,192.168.188.5, ,5050>
Interpretation of K Command Settings: Custom Ethernet Link Enabled Default, Transport Layer =
UDP, Type = Client, Capabilities = Send, IP Address = 192.168.188.5, Port = 5050.
 Multicast
Server Mode
The following uses the default Multicast IP Address generated in the device.
Send/Receive Capabilities
<K166,1,2,0,3>
Interpretation of K Command Settings: Custom Ethernet Link Enabled Default, Transport Layer =
Multicast, Type = Server Default, Capabilities = Send/Receive Default.
Send-Only Capabilities
<K166,1,2,0,2>
Interpretation of K Command Settings: Custom Ethernet Link Enabled Default, Transport Layer =
Multicast, Type = Server Default, Capabilities = Send.
Client Mode
The following client modes will connect to a Multicast server with IP Address 224.0.1.90 listening on
port 5050.
Send/Receive Capabilities
<K166,1,2,1,3, ,224.0.1.90,5050>
Interpretation of K Command Settings: Custom Ethernet Link Enabled Default, Transport Layer =
Multicast, Type = Client, Capabilities = Send/Receive Default, IP Address = 224.0.1.90, Port = 5050.
Send-Only Capabilities
<K166,1,2,1,2, ,224.0.1.90, ,5050>
Interpretation of K Command Settings: Custom Ethernet Link Enabled Default, Transport Layer =
Multicast, Type = Client, Capabilities = Send, IP Address = 224.0.1.90, Port = 5050.
8-12
V440-F C-Mount Code Reader User Manual