Omron V440-F User Manual page 29

1 Overview of WebLink Interface
Note: The Train button only appears in the Device Control Toolbar when Cycle is configured to look
for only 1 symbol. When configured to look for 2 or more symbols, the Train button disappears as
shown in the example below.
Optimize
Optimize saves relevant information about the target symbol, allowing the subsequent symbols to be
processed more quickly and consistently.
The reader has three optimization states: un-optimized, optimizing, and optimized. When the reader
is in the un-optimized state and the Optimize button is clicked, the reader enters the optimizing state
until a symbol is decoded or until the Optimize button is clicked again to deactivate the optimizing state.
When a symbol is decoded during the optimizing state, the reader enters the optimized state.
Note: Because the Train operation can impact symbol readability, it will un-optimize the system once an
image is processed. You can optimize the system again after a Train operation.
1-9-2 Image Control Toolbar
Fit Image to Window
Fits the captured image to the Image Area window.
Zoom In
Zooms in on the desired area of the captured image.
1-14
V440-F C-Mount Code Reader User Manual