Time Since Reset - Omron V440-F User Manual

Appendices
H-15 Time Since Reset
Note: Time Since Reset is a read-only command.
Hours
Serial Cmd:
Default:
Hours uses a 16-bit counter that increments every 60 minutes.
Minutes
Serial Cmd:
Default:
Minutes uses a 16-bit counter that increments every 60 seconds.
Note: Time counts are reset at power-on, but not with an <A> or <Z> command.
H-36
<K407,hours,minutes>
16-bit counter (0 to 65535)
<K407,hours,minutes>
16-bit counter (0 to 60)
V440-F C-Mount Code Reader User Manual