Match String - Omron V440-F User Manual

4 Setup
4-7

Match String

Match String will attempt to match to the decoded data. It will not attempt to match to the Formatted
Output Data.
Note: Match String can only be used in Triggered, Start/Stop, and Custom modes. It cannot be used
in Presentation or Continuous modes.
To open the Match String Editor, go to the Setup view and turn Match String ON as shown below.
Then click on the Mode link (shown as Standard in the example below) to open the Match String Editor.
In the Match String Editor, click on the Mode link under Match Options to select your Match String
Mode – Standard, Wildcard, or Sequential.
4-30
V440-F C-Mount Code Reader User Manual