Omron V440-F User Manual page 87

4 Setup
Note that Look for n codes in the Cycle editor is the correct value matching the matrix, which in this
example is 96. Setting a Look for n codes value is required for the system to perform all decodes.
Next, drag and resize the entire grid so that all codes are centered in their own search areas. The entire
grid area can be moved easily by clicking on it with the mouse and dragging it. The grid area can also
be resized by clicking on any of the ROI anchor points and dragging them to the desired position.
You can switch modes in the dialog box between adjusting the Position, Size, and Offset of the
individual ROI search areas.
You can also switch between Position, Size, and Offset modes by clicking the appropriate icon on the
screen. Clicking the icon will toggle from one setting to the next.
4-24
V440-F C-Mount Code Reader User Manual