Omron V440-F User Manual page 107

4 Setup
4-9-3 Pulse Width
Pulse Width sets the time in milliseconds that the discrete output remains active.
4-9-4 State
Output State allows you to set the active electrical state of the discrete output to Normally Open or
Normally Closed.
4-9-5 Triggered Outputs
Triggered Outputs show when outputs are triggered and give you the ability to trigger outputs manually.
Outputs 1 - 3 are located in the lower right corner of the user interface. They function both as buttons
that trigger whichever output you click, and as a display that shows which output is currently being
triggered. In the example below, output 2 is being triggered.
Note: The three output indicators shown below display the results of the last read cycle.
4-44
V440-F C-Mount Code Reader User Manual