Omron V440-F User Manual page 40

Example 3: NERLITE Smart Series Light without QX-1
Dwg. Ref.
1 C-Mount Lens
2 V440-F C-Mount 5 MP Camera
3 Industrial High-Flex GigE Ethernet Cable with Jack Screws and RJ45 Connector
PoE (Power over Ethernet)
4
Industrial Switching HUB
5 Integrated Light Y Cable
6 NERLITE Smart Series R-70 or R-100 Ring Light
7 M12-to-Flying Leads Cable
*1. The V430-WQ cable (excluding V430-WQR / V430-WQK) can be used as an extension of the V430-W8 cable.
*2. It is possible to connect a 97-000012-01 power supply instead of V430-W8. However, since there is no I/O line, you cannot connect
to the sensor or PLC.
*3. A 24VDC power supply is not needed for V440-F if a PoE switching HUB is used.
Example 4: Minimum Power over Ethernet (PoE) Configuration
Dwg. Ref.
1 C-Mount Lens
2 V440-F C-Mount 5 MP Camera
3 Industrial High-Flex GigE Ethernet Cable with Jack Screws and RJ45 Connector
4 PoE (Power over Ethernet) HUB
*1. A 24VDC power supply is not needed for the V440-F if a PoE switching HUB is used.
V440-F C-Mount Code Reader User Manual
Category
Category
2 Quick Start
Part Number
3Z4S-, 98-9000-01
V440-FXXXY50M-NN
98-00013-0
Select a cable that can supply power via Ethernet.
Example: W4S1 Series
61-900013-01
NER-01166G
V430-W8-M
Part Number
3Z4S-, 98-9000-01
V440-FXXXY50M-NN
98-00013-0
Select a cable that can supply power via Ethernet.
2
2-9