Omron V440-F User Manual page 110

4 Setup
Simple Mode Quick Start Example
In the following example, you will see how to set up the Configuration Database to read two different
code types that require two different image exposure settings to be seen.
4
The Configuration Database is enabled from the Cycle dialog box. The total number of codes you want
to find is set at this time. For this example, the system is set to find 1 code.
When switched on, the Configuration Database dialog becomes active with a single Image entry, and
with one Decode tool entry in that image. Clicking on the Add Image button at the bottom of the dialog
adds another image with an additional decode tool inside of it.
4-47
V440-F C-Mount Code Reader User Manual