Modules And E-Labels - AGFA DRYSTAR 5302 5366 Service Manual

DD+DIS150.05E

Modules and E-Labels

5.3
The E-Label is a small EPROM attached to the module, which keeps information about
the module, like e.g.:
An example for the readout of an E-Label is given in Figure 20
In case the E-label is defective or not connected the printer issues a warning message.
Printing is possible however also without E-label.
The decision, whether a module has an E-label or not depends on whether the
corresponding module:
The table in section 5.1 lists, which module has an E-Label.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
06-2009
•
Name
•
Hardware Version
•
Nr. of print cycles
•
Last error code
•
Can be repaired in the repair center or
•
Requires module specific data
Figure 19: Example for E-Label at Power Supply
DOCUMENT CONTROL NOTE:
DRYSTAR 5302
Type 5366/100
Functional Description
Agfa Company Confidential
Chapter 2 / 21