AGFA DRYSTAR 5302 5366 Service Manual page 452

Glossary and Key Word Index
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Chapter 12 / 4
Agfa Company Confidential
EMI
EPROM
Ethernet
F
FIFO
Film batch
Film Sensitometry
Film type
FireWire
Flash EPROM
Fog level
FPGA
FSE
FTP
G
Printed copies of this document are not controlled.
DRYSTAR 5302
(Type 5366/100)
ElectroMagnetic Interference.
Erasable, Programmable Read Only Memory.
Memory chip that can be erased by ultraviolet
light and be electronically programmed again.
Network carrier technology for LANs (Local
Area Networks).
First In, First Out.
Way of storing data that first selects the data
that have been entered first.
Used in (print) queues.
Number printed on the film packet.
It changes with every new film emulsion. Only
the films with the same film batch have
exactly the same characteristics.
Calibration of the film.
By calibrating, the printer gets a table with
certain density values for certain control
values.
Film of a certain producer or a similar
producer but with different characteristics
(sensitivity, contrast).
Serial bus standard also known as
IEEE1394. Data rate up to 400 Mb/s.
An EPROM in which data have to be deleted
in fixed blocks instead of separate bytes.
Lowest optical density that can be measured
on the film.
Field Programmable Gate Array.
A logic chip, which can be programmed. An
FPGA can be programmed after its
production.
Field Service Engineer. Service technician.
File Transfer Protocol.
A network protocol required for file transfer
within the network.
DD+DIS150.05E
Edition 1, Revision 0
2005-09-09