Infocounter Analysis Via Service Command Session; How To Evaluate The Infocounter - AGFA DRYSTAR 5302 5366 Service Manual

DD+DIS149.05E
3.2.2
3.2.3
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09

Infocounter analysis via Service Command session

Required Tools
• Service PC, required to connect to the printer and analyze the infocounter
(1) Connect the Service PC to the
network
(2) Start the browser (Internet
Explorer ≥ 5)
(3) Enter the IP address of the
printer in the address window.
(4) Select menu "Service Engineer
Tools - Enter Service Command
Session - 7 Service Actions - 5
Logging - 2 Infocounters"
(5) Save the infocounter file to the
service PC or the CF card.
(6) Unzip the infocounters ZIP file
(7) Analyze the infocounter.txt file
as described in section 3.2.3,

How to evaluate the Infocounter

How to evaluate the Infocounter
What to check in the
infocounter
1.1 Serial number and
Installation date
1.4 Software Info
Printed copies of this document are not controlled.
DRYSTAR 5302
(Type 5366/100)
Infocounters.txt evaluation
Comment
Compare device serial number with chapter 8
'Manufacturing Standard Modification' to
determine whether the device possibly requires a
modification.
Refer to 3.3 (infocounter.txt), 'HW Modification
History', to check already made modifications.
Compare the currently installed SW version with
the latest SW version described in chapter 3.8,
SW releases, patches. In case a recommended
SW patch is available, install this SW patch.
Refer to section 5.2.
Maintenance
Service PC
Printer
536632el.cdr
Figure 3
Chapter 9 / 7
Agfa Company Confidential