Image Adjustments; Image Adjustments As Described In The Connectivity Release Document - AGFA DRYSTAR 5302 5366 Service Manual

DD+DIS150.05E
6.4
6.4.1
MEDNET Path
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09
Controls, Connections and Set Up Procedures

Image adjustments

Image adjustments in general can be made at the modality and / or the printer.
For many modality - printer combinations the required image adjustments are
described in a Connectivity Release Document.
The systematic image adjustment is split up in following steps:
Step # Description
1 Perform adjustments as described in the
Connectivity Release Document for the modality
- printer combination.
2 If required, try to perform image adjustments at
the modality
3 In case the required image adjustment at the
modality is not possible, perform it at the printer.
Possibility 1: Via Key-operator menu
Possibility 2: Via DICOM profile Browser pages
In case the printer is part of a solution (e.g. IDIS Solution), refer to the
solution specific requirements concerning image adjustments.

Image Adjustments as described in the Connectivity Release Document

Connectivity Release Documents describe all parameters and required
adjustments to guarantee:
•
Communication between modality and the printer
•
Image adjustment at the modality and / or the printer.
Connectivity Release Documents are available in MEDNET, HealthCare
Library - General Info - Connectivity & Application
In case
•
The customer is not satisfied with the adjustments as described in the
Connectivity Release Document or
•
For this modality connection no Connectivity Release Document exists
Continue with next step: Image Adjustment at the Modality.
Printed copies of this document are not controlled.
Drystar 5302
(Type 5366/100)
Details see...
6.4.1
6.4.2
6.4.3
6.4.4
Chapter 1 / 19
Agfa Company Confidential