AGFA DRYSTAR 5302 5366 Service Manual page 383

DD+DIS149.08E
17 Introduction of Software 1.9.0_C4
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
18 Changed Pickup Module CM+349268.3
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
05-2008
Manufacturing Standard Modifications
Improvement of production process: Sporadic film jams in the
output module and too large top border appeared.
SN ≥ 4368 plus 3923, 3924, 3976, 3988, 3995, 4000, 4006, 4007,
4009, 4012, 4013, 4015, 4018, 4020, 4024, 4025, 4027, 4030,
4031, 4033, 4034, 4035, 4039, 4041, 4042, 4043, 4045, 4046,
4048, 4051, 4053, 4054, 4056 to 4058, 4061 to 4067, 4070, 4071,
4073, 4075, 4076, 4079, 4082 to 4087, 4090, 4091, 4093 to 4095,
4097, 4098, 4100, 4101, 4103 to 4112, 4115, 4117, 4118 to 4124,
4130, 4135, 4136, 4159, 4161, 4164, 4169, 4172, 4183, 4186,
4187 to 4195, 4201, 4202, 4208, 4212, 4213, 4214, 4216, 4217,
4219 to 4226, 4228, 4230, 4231 to 4237, 4239 to 4249, 4251,
4252, 4254 to 4262, 4264, 4266, 4267 to 4316, 4318 to 4354,
4355, 4357, 4358 to 4365, 4366 / July 2007
None
•
SB No. 07, DD+DIS263.07E
•
Installation Instructions SW 1.9.0_C4, DD+DIS268.07E
Improvement of production process: Faults in pickup module due to
too high tolerances.
July 2007
Pickup Module CM+349268.4
None
DOCUMENT CONTROL NOTE:
DRYSTAR 5302
Type 5366/100
Chapter 8 / 13
Agfa Company Confidential