AGFA DRYSTAR 5302 5366 Service Manual page 44

Controls, Connections and Set Up Procedures
4.2
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Chapter 1 / 10
Agfa Company Confidential
Default densitometer
Accessible via menu:
Purpose of the setting:
Default value:
The default densitometer menu is accessible via key-operator menu on the
keypad and key-operator menu via browser.
Example browser
screen:
Printed copies of this document are not controlled.
Drystar 5302
(Typ 5366/100)
Key-operator menu - 2 Change settings - 4 Image
Quality - 1 General
Define a default densitometer. Density values
displayed during calibration or the QC procedure
will be displayed re-calculated for this default
densitometer.
Macbeth TR924
Welcome to this
DryStar 5302 printer
Key-Operator - Change Image quality settings
Default film calibration
Default Densitometer
Accept changes Discard changes Reset Values
DD+DIS150.05E
off
on
Macbeth TR924
Gretag
X-Rite 301
X-Rite 310
Figure 5
Edition 1, Revision 0
2005-09-09
536601fb.cdr