AGFA DRYSTAR 5302 5366 Service Manual page 132

Repair and Service
Machine specific tools, software tools and auxiliary means
2.5.5.1
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Chapter 3.2/30
Agfa Company Confidential
Example 1: Adaptation of the taste LUT (contrast)
Whenever the host with AE title 'CTSCAN200' sends a print job to the
printer, the taste LUT shall be adapted to 'Kanamori_like 200'.
(1) In the printer homepage select
'Service Engineer tools - Enter
service command session'
(2) Enter username and password
(3) Select 'DICOM profile editor'
(4) Select 'New'.
Refer to Figure 28.
(5) In the host profile window select
'change' at the 'host profile
type', to see, whether the
connected host is part of the
hosts database. Refer to Figure
29.
Printed copies of this document are not controlled.
(Type 5366/100)
Drystar 5302
DD+DIS150.05E
Welcome to this
DryStar 5302 printer
SERVICE TOOLS
HOME General information
List of errors
Printer Infocounters report
DICOM, LPD and HIPAA report
QA Report Page
Software versions
Remote sessions
Show printer status
Enter key-operator command session
Enter service command session
Release remote command session
Connectivity tools
Scaling Setup
DICOM profile editor
LPD Profile Editor
Network configuration
Printqueue editor
Controller logging
Module repair
Modules
Figure 27
Figure 28
Edition 1, Revision 0
536632et.cdr
2005-09-09