Solved Software Issues - AGFA DRYSTAR 5302 5366 Service Manual

DD+DIS150.05E
6.1

Solved Software Issues

Sporadic film jams in the output module and corresponding error message:
Symptom 1
"Film jam - Open top cover and clear film jam"

The fault mainly appears with 8x10" or 12x10" films printed from the lower tray.

With lower probability the fault may also happen:
o With other film formats (14x17", 14x14", 14x11") printed from the lower tray
o With any film format printed from the upper tray
Top border is too large (> 7 mm);
Symptom 2
images possibly printed until the
trailing edge of the film.
Software fault in software 1.9.0_C3
Cause
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
02-2015
Software Releases and Patches
approx. 6 mm
DOCUMENT CONTROL NOTE:
DRYSTAR 5302
Type 5366 /100/300
Repair and Service
O.K. NOT O.K.
> 7 mm
Figure 1
Agfa Company Confidential
Chapter 3.8 / 12